This versatile on-demand continuous flow water heater with 87% efficiency saves customers as much or more than the leading cast iron boilers at half the size!”;”This versatile on-demand continuous flow water heater with 87% efficiency saves customers as much or more than the leading cast iron boilers at half the size!
- Continuous hot water
- Compact size and 81 lb. weight allows for oner person installation
- Inlets/outlets on two sides for easy installation
- Choice of direct vent or chimnet vent
- Cold start capability
- Flow rate of over 4 gallons per minute with 60°F rise in temperature
- Approximately 180°F maximum hot water temperature
- Very quiet and reliable operation
- Stainless steel heat exchanger and cabinet
- Adjustable temperature differential for cycling control
- Safe: ETL and home and mobil home approved
- Proven trouble-free performance.
- Limited 10 YEAR WARRANTY
Specs:
|
Model: |
OM-180 Water Heater |
| Ignition: | High Voltage Discharge Spark |
| Fuel Type: | No. 2 Fuel Oil [Typical Home Heating Oil] or No.1 Fuel Oil (ASTM D396) |
| Efficiency: | 90% |
| Heat Rating: | 148,000 BTU/h |
| Fuel Consumption: | 0.87 gal./h |
| Fuel System: | Oil tank |
| Maximum Hot Water Tempereature: | 180 °F (approximately) |
| Water Flow Rate/ Temperature Rise: |
5.1 gal./min (40 °F rise) |
| Capacity of Heat Exchanger: | 4.2 gal |
| Dimensions (W x H x D): | 12-5/8" x 27-3/4" x 22-1/2" |
| Weight: | 81 lbs. (Empty) |
| Vent Pipe Hole: | 4-3/4" (Diameter) |
|
Maximum Length of Flue Vent Pipe System: |
10 ft., 3 bends of less |
| Electrical Rating: | 120Volts AC. 60 Hz Ignition:120 Watts Burning: 98 Watts |
| Required Accessories: | In-line fuel filter Temp & pressure relief valve Flue pipe installation kit or Chimney installation adapter kit |
| Safety Devices: | Over-heat protecter Ignition safety device Empty burning protective device Heat exchanger bi-metal switch Temperature fuse, Fusible link valve |
Categorized in Water Heaters